📄️ Network Settings
The gateway has two wired network interfaces: Eth0 and Eth1.
📄️ Parameter Settings
Before starting, we need to set some system parameters for the gateway. Please refer to the following content for configuration:
📄️ Device Management
The following content uses Modbus as an example for demonstration. For other types of devices, please refer to the corresponding driver type for settings.
📄️ Monitoring and Debugging
After configuring the drivers, groups, and variable tables, you can open "Real-time Monitoring" to view the real-time values and timestamps of each variable (the refresh rate is determined by the cycle of the variable group) to verify whether the driver and variable addresses are set correctly.
📄️ Trend Charts
Trend charts can be used to observe the changing trends of multiple tags. After entering the menu, select the tags you need to monitor and add them. After adding, you can choose the color of the tag curves. Set the recording interval and press record, the system will automatically record the curves.